As a wholesale supplier to jewelers and other industry professionals, Rio Grande wants to avoid presenting wholesale pricing to retail consumers. In addition, the U.S. Patriot Act requires all suppliers of precious metals to maintain full contact information for all of its customers.
gold processing,extraction,smelting plant design, equipment for sale | prominer (shanghai) mining technology co.,ltd
Prominer maintains a team of senior gold processing engineers with expertise and global experience. These gold professionals are specifically in gold processing through various beneficiation technologies, for gold ore of different characteristics, such as flotation, cyanide leaching, gravity separation, etc., to achieve the processing plant of optimal and cost-efficient process designs.
Based on abundant experiences on gold mining project, Prominer helps clients to get higher yield & recovery rate with lower running cost and pays more attention on environmental protection. Prominer supplies customized solution for different types of gold ore. General processing technologies for gold ore are summarized as below:
For alluvial gold, also called sand gold, gravel gold, placer gold or river gold, gravity separation is suitable. This type of gold contains mainly free gold blended with the sand. Under this circumstance, the technology is to wash away the mud and sieve out the big size stone first with the trommel screen, and then using centrifugal concentrator, shaking table as well as gold carpet to separate the free gold from the stone sands.
CIL is mainly for processing the oxide type gold ore if the recovery rate is not high or much gold is still left by using otation and/ or gravity circuits. Slurry, containing uncovered gold from primary circuits, is pumped directly to the thickener to adjust the slurry density. Then it is pumped to leaching plant and dissolved in aerated sodium cyanide solution. The solubilized gold is simultaneously adsorbed directly into coarse granules of activated carbon, and it is called Carbon-In-Leaching process (CIL).
Heap leaching is always the first choice to process low grade ore easy to leaching. Based on the leaching test, the gold ore will be crushed to the determined particle size and then sent to the dump area. If the content of clay and solid is high, to improve the leaching efficiency, the agglomeration shall be considered. By using the cement, lime and cyanide solution, the small particles would be stuck to big lumps. It makes the cyanide solution much easier penetrating and heap more stable. After sufficient leaching, the pregnant solution will be pumped to the carbon adsorption column for catching the free gold. The barren liquid will be pumped to the cyanide solution pond for recycle usage.
The loaded carbon is treated at high temperature to elute the adsorbed gold into the solution once again. The gold-rich eluate is fed into an electrowinning circuit where gold and other metals are plated onto cathodes of steel wool. The loaded steel wool is pretreated by calcination before mixing with uxes and melting. Finally, the melt is poured into a cascade of molds where gold is separated from the slag to gold bullion.
Prominer has been devoted to mineral processing industry for decades and specializes in mineral upgrading and deep processing. With expertise in the fields of mineral project development, mining, test study, engineering, technological processing.